Troubleshooting - Elation EPAR QA User Instructions

EPAR QA
EPAR QA
Photometric Beam Angle Data
Standard 10° Beam Angle
LUX x 0.0929 = FC
R 267 FC / 2871 LUX 64 FC / 691 LUX
G 351 FC / 3774 LUX 94 FC / 1011 LUX
B 42 FC / 450 LUX 13 FC / 137 LUX
A 165 FC / 1774 LUX 51 FC / 553 LUX
ALL 727 FC / 7830 LUX 191 FC / 2060 LUX
0 m
0 ft
1 m
3.28 ft
EPAR QA
Beam Diameter
10° Beam Angle Ø 0.24 m / Ø 0.79 ft
Ramp Effect Unit Dim Mode
Standard
Stage
TV
Architectural
Theatre
Elation Professional - www.elationlighting.com - EPAR QA Instruction Manual Page 17
Photometric Chart
33 FC / 350 LUX
40 FC / 428 LUX
6 FC / 62 LUX
24 FC / 259 LUX
91 FC / 981 LUX
2 m 3 m
6.56 ft 9.84 ft
Dimmer Curve Diagram
Ø 0.48 m / Ø 1.57 ft Ø 0.72 m / Ø 2.36 ft
(Fade Time)
EPAR QA
EPAR QA
EPAR QA
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
EPAR QA
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
(Fade Time)
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
Elation Professional - www.elationlighting.com - EPAR QA Instruction Manual Page 18
Power Consumption Setting
Display 120V/60Hz
P001 62W
P002 66W
P003 77W
230V/50Hz
61W
66W
76W
Cleaning
Trouble Shooting