Troubleshooting - Elation ELED B48 User Instructions

ELED B48 12 Channel DMX Values and Functions
Channel Value
1 0 - 255
2 0 - 255
3 0 - 255
4 0 - 255
5 0 - 255
6 0 - 255
7 0 - 255
8 0 - 255
9 0 - 255
10 0 - 255
11 0 - 255
12 0 - 255
Note: Red/Green/Blue 1, Red/Green/Blue 2, Red/Green/Blue 3,
and Red/Green/Blue 4, refer to sections of the ELED B48.
Please see page 9 for the diagram.
Elation Lighting - www.elationlighting.com - ELED B48 Instruction Manual Page 11
© ®
Function
RED 1
0% 100%
GREEN 1
0% 100%
BLUE 1
0% 100%
RED 2
0% 100%
GREEN 2
0% 100%
BLUE 2
0% 100%
RED 3
0% 100%
GREEN 3
0% 100%
BLUE 3
0% 100%
RED 4
0% 100%
GREEN 4
0% 100%
BLUE 4
0% 100%
ELED B48
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
ELED B48
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Use a brush to wipe down the fan grill.
3. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
4. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
Elation Lighting - www.elationlighting.com - ELED B48 Instruction Manual Page 12
© ®
Trouble Shooting
Cleaning