5.
Host affinity creation
Create an association between a host group and a port
group and an association between a host group and a
LUN group.
To display the screen to create a host affinity:
Click [Create Host Affinity] in [Action] on the
[Connectivity] tab.
Monitoring Setup
STEP
Perform the ETERNUS DX monitoring setup if required.
●
Notification of the ETERNUS DX problems as they occur is possible if the event notification method and level
have been set.
●
If remote support is required, the ETERNUS DX needs to be set to notify the remote support center of failures.
Remote support allows prompt detection and resolution of trouble.
Point
Configuration Guide (Basic)
Server Connection
STEP
Perform the settings required to connect to the server and install the required drivers. Perform the settings required
for network devices connecting the server and the ETERNUS DX.
After the server connection setup, confirm that the volumes in the ETERNUS DX can be recognized by the server.
All necessary settings are complete, and the ETERNUS DX is now ready for normal operation.
Configuration Guide (Basic)
•
Configuration Guide -Server Connection-
•
FUJITSU Storage ETERNUS DX200F All Flash Array Setup Guide
Copyright 2014 FUJITSU LIMITED
8
P3AM-8482-01ENZ0