Basic Setup - Fujitsu ETERNUS DX200F Setup Manual

Basic Setup

STEP
Use ETERNUS Web GUI to perform a basic setup of the ETERNUS DX.
Configuration Guide (Basic)
ETERNUS DX and PC Terminal Connection
1
Connect a PC terminal to the ETERNUS DX.
Connect the PC terminal to the RMT port of Controller 0 (CM#0) on the ETERNUS DX directly with the LAN cable.
PC terminal
Powering On
2
Turn on the PC terminal and the ETERNUS DX.
Power switch
ETERNUS Web GUI Startup
3
1.
Open the Web browser on the PC terminal.
2.
Enter either of the following URLs in the address bar of the Web browser.
http://192.168.1.1/
The login screen for ETERNUS Web GUI appears.
3.
To change the user interface language, click the [Option] button and select "English" or "Japanese" in
"Language".
4.
Enter the Username and Password.
User name: root
Password: root (by default)
After logging in, the Initial Setup screen of ETERNUS Web GUI appears.
LAN port
LAN cable
RMT port of Controller 0 (CM #0)
FUJITSU Storage ETERNUS DX200F All Flash Array Setup Guide
Copyright 2014 FUJITSU LIMITED
4
P3AM-8482-01ENZ0