Setting The Alarm; Set The Radio Alarm; Set The Beep Alarm; Set The Sleep Timer - Radio Shack 2000629 User Manual

Setting the Alarm

You can set the alarm when the radio is
switched on or off. If the radio is switched
on, press DISPLAY to show the clock time.

Set the Radio Alarm

1. Press . The display
shows the current
alarm time and the
icon flashes.
2. Use the digit buttons
to enter the alarm time.
3. Press to confirm.
4. Tune the radio to the desired station.
To check the alarm time
1. Press to display the alarm time.
2. Press to return to clock time.
To cancel the radio alarm
Press to enter radio alarm mode. Then
either:
• Press C; the alarm icon disappears.
OR
• During the alarm, press POWER to turn
off the alarm for 24 hours.
n
Note: During the alarm, if you do not press
POWER to turn off the alarm, the alarm sounds
for one hour.

Set the Beep Alarm

1. Press . The display
shows the last alarm
time set and the
icon flashes.
2. Use the digit buttons
to enter the alarm time.
3. Press to confirm.
12
To cancel the beep alarm
Press to enter the beep alarm time mode.
Then either:
• Press C ; the alarm icon disappears.
OR
• When the alarm sounds, press POWER
to turn off the alarm.
n
Note:
• A repeat beep tone sounds when the
beep alarm activates. The alarm beep will
increase volume every 15 seconds for one
minute, followed by one minute of silence
before repeating the cycle.
• During the alarm, if you do not press
POWER to turn off the alarm, the alarm
sounds for one hour.

Set the Sleep Timer

The sleep timer will automatically switch off
the radio according to the time you select.
1. Press and hold
POWER/ . The
display will cycle
through the sleep
time options: 60, 30,
15, 120, and 90 minutes.
2. When your desired time appears,
release POWER/ . The sleep icon
and the radio frequency appear.
After 2 seconds, the display shows the
frequency.
To cancel the sleep timer
Press POWER/ . The sleep icon
disappears, the display reverts to clock time,
and the radio turns off.
13