Assigning Sliders For Volume In Different Zones - Kurzweil PC88 A Step By Step Manual

PC88 Made Easy

3. Assigning Sliders for Volume in Different Zones

1. Go through steps 1-4 in tutorial #1.
2. Hold the Controllers button and move Slider A. The display now shows Zone:1 Slider
A, Ctrl Num:None. Press 7, then Enter to assign Slider A to Volume. (Controller #7 is
MIDI Volume. For a complete list of all the MIDI controllers, see Appendix F in the
manual.)
3. Go through steps 5 and 6 in tutorial #1 to create a second zone.
4. Hold the Controllers button and move Slider B. The display now shows Zone:2 Slider
B, Ctrl Num:None. Press 7, then Enter to assign Slider B to Volume. Play the keyboard
and move the two sliders. You can control the volume of each zone independently.
5. Go through steps 8 and 9 in tutorial #1 to name and save your Setup.
Of course, you can use the C and D sliders to control volumes on the 3rd and 4th zone
in a Setup. We have already created a template Setup, #16 Volume Sliders, which does
this. So though we normally suggest you start with Setup 127 when making your own
Setups, you can start with this one and just change the programs to the ones you need
for a quick way to create a Setup.. However, it is good to try making your own from
scratch at least once to see how it is done.
13