Operation; Turning The Tv On And Off; Plug & Play Feature - Samsung 530 Series 5 User Manual

Operation

Turning the TV On and Off

Press the POWER button on the remote control.
You can also use the POWER
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1.
Press the POWER button on the remote control.
The message "Menu Language, Store Demo, Channels and Time will be set."
is displayed.
Press the ENTER button, then "Select language of the OSD." menu
is automatically displayed. Press the ENTER
2.
Press the or button to select language, then press the ENTER
button. The message "Select 'Home Use' when installing this TV in your
home." is displayed.
3.
Press the or button to select "Store Demo" or "Home Use", then
press the ENTER button. The message "Select the Antenna source to
memorize." is displayed.
We recommend setting the TV to "Home Use" mode for the best picture in
your home environment.
"Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to "Store Demo" mode and you want to return
to "Home Use" (Standard): Press the Volume button on the TV. When the
volume OSD is displayed, press and hold the MENU button on the TV for
5 seconds.
4.
Press the or button to memorize the channels of the selected
connection. Press the ENTER
Air: "Air" antenna signal.
Cable: "Cable" antenna signal.
Auto: "Air" and "Cable" antenna signals.
In Cable mode, you can select the correct signal source among STD,
HRC, and IRC by pressing the
ENTER button. If you have Digital cable, select the cable system
signal source for both Analog and Digital. Contact your local cable
company to identify the type of cable system that exists in your particular
area.
5.
The TV will begin memorizing all of the available channels.
To stop the search before it has ¿nished, press the ENTER
"Stop" selected.
After all the available channels are stored, it starts to remove scrambled
channels (see page 40). And then, the Auto program menu reappears.
Press the ENTER button when channel memorization is complete.
The message "Set the Clock Mode." is displayed.
6.
Press the ENTER button.
Press the or button to select "Auto", then Press the ENTER
The message "Set to daylight saving time." is displayed.
If you select "Manual", "Set current date and time" is displayed.
(See page 45)
7.
Press the or button to select "Off" or "On", then press the ENTER
button. The message "Select the time zone in which you live." is displayed.
button on the TV.
button.
button to select "Start".
, , or button, then press the
English - 12
Plug & Play
Menu Language, Store Demo, Channels and Time will
be set.
Plug & Play
Select language of the OSD.
Menu Language
Plug & Play
Select 'Home Use' when installing this TV in your
home.
Store Demo
Plug & Play
Select the Antenna source to memorize.
Air
Cable
Auto
Plug & Play
Auto Program in Progress.
DTV Air : -- Air : --
button with
Plug & Play
Auto Program is completed.
3 channels are memorized.
DTV Air : 1 Air : 2
button.
Plug & Play
Set the Clock Mode.
Clock Mode
Plug & Play
Set to daylight saving time.
DST
OK
Enter Return
English
: English
Español
Français
Move Enter
Home Use
Move Enter
Start
Start
Start
Move Enter Skip
Air 38
3%
Stop
Enter Skip
OK
Enter Skip
: Auto
Auto
Manual
Move Enter Skip
: Auto
Off
On
Move Enter Skip