Kurzweil PC88 Musician's Manual page 88

MIDI Setups
Standard Setups
16 Volume Sliders
17 FluidGtr & Vibe
18 Click & Trio
19 E Bass/ E Pno
20 Duo Comp 1
21 Vtrig E Piano
22 Shift Limits!
23 Three Things
24 dingalingling
25 Arps on Top
26 Sustain E Piano
27 Enter & Xfade
28 Marimba Thing
29 Click/Ride
30 Pan Sliders
31 MIDI Template
32 Local Template
127 Default Setup
E-2
Template : Used for the tutorial in Chapter 1 of this book. All settings are default,
except for program and slider assignments. A is Zone 1 volume. B is Zone 2 vol-
ume. C is Zone 3 volume. D is Zone 4 volume.
A is reverb wet. B is chorus wet.
A is reverb wet. B fades Ride. C and Whl2 are Click volume. F goes to A Bass & Ride
(Zone 1). G latches the Arpeggiator in Add mode to ÒsequenceÓ the click (A0-A#0).
Activate Zone3 to add Strings. C is Strings volume.
A is reverb wet. B is chorus wet.
A is reverb wet. B is chorus wet. Percussive Marimba is triggered only on accented notes.
Example : Note shifts with the floating limit option. SwitchPdl2 stops the arpeggia-
tion and allows normal playing.
A pans Zone 1. B pans Zone 2. C is Marimba volume. Pressure sends Pitch Bend
on Zone 1. G is the overplay latch: Hold a note while pressing G for Arpeggiation.
Example : Note shifts with the stop option. C is reverb wet. D is tempo. G is the
Add-mode latch.
B is Zone 2 (arpeggio) volume. C is Strings volume. D is Tempo. SwitchPdl1 is Sos-
tenuto for Strings.
A is the pad volume.
Example: Reverse curves and entry values. A controls volume of the low Strings,
and inverse volume of the high Strings. Curves and entry values are set for a smooth
octave crossfade: Hold a chord and move A from top to bottom. B is delay wet. C
is strings filter. D is release control.
A pans Zone 1. B pans Zone 2.
Template: Copy Zone 1 to use the layered ride in another setup; Copy Zone 2 and
the arpeggiator to add the automatic Click to another setup. A is Ride volume. B is
Click volume. D is tempo. G is the add-mode latch.
Template : Program Entry Transmit is off for all zones. Selecting this setup will not
change programs. Move to this setup to play with panning on any 4 channels while
mixing. A pans Zone 1. B pans Zone 2. C pans Zone 3. D pans Zone 4.
Template: Destination is MIDI-only for all zones. Start with this setup for use with
external gear. A is Zone 1 volume (MIDI channel 1). B is Zone 2 volume (MIDI
channel 2). C is Zone 3 volume (MIDI channel 3). D is Zone 4 volume (MIDI chan-
nel 4). Exit values are 127 for all sliders.
Template: Destination is Local only for all zones. Start with this setup when you
do not want zones to send MIDI out. A is Zone 1 volume. B is Zone 2 volume. C
is Zone 3 volume. D is Zone 4 volume. Exit values are 127 for all sliders.
All Zones are Off and have ÒdefaultÓ assignments: Pitch Bend, Mod Wheel, Sustain and
Sostenuto. All sliders, buttons, key pressure and CC pedals are unassigned. All controller
scalings are 100%, curves are linear, and offsets are 0. Copy this Setup to a location that
you find ÒhandyÓ and use it as a starting point for making your own setups.
PC 88