Brother MFC-215C User Manual page 125

Hide thumbs Also See for MFC-215C:
Table of Contents

Advertisement

ERROR MESSAGES
ERROR
MESSAGE
Ink Empty
Low
Temperature
Media Error
Near Empty
No Cartridge
No File
No Paper Fed
No
Response/Busy
Not
Registered
Downloaded from ManualsPrinter.com Manuals
CAUSE
One or more of the ink cartridges
is empty. The machine will stop all
print operations. While memory is
available, black and white faxes
will be received into memory. If a
sending machine has a colour fax,
the machine's 'handshake' will
request that the fax be sent as
black and white. If the sending
machine has the ability to convert
it, the colour fax will be received
into memory as a black and white
fax.
The print head is too cold.
The media card is either
corrupted, Improperly formatted,
or there is a problem with the
media card.
One or more of the ink cartridges
are running out of ink. If a sending
machine has a colour fax, the
machine's 'handshake' will
request that the fax be sent as
black and white. If the sending
machine has the ability to convert
it, the colour fax will be received
into memory as a black and white
fax.
An ink cartridge is not properly
installed.
The media card in the media drive
does not contain a .JPG file.
The machine is out of paper.
The paper is jammed in the
machine.
The number you dialled does not
answer or is busy.
You tried to access a Speed Dial
number that is not programmed.
TROUBLESHOOTING AND ROUTINE MAINTENANCE 12 - 2
ACTION
Replace the ink cartridges.
(See Replacing the ink cartridges on page
12-26.)
Allow the machine to warm up.
Re-insert the card firmly into the slot to make
sure it is in the correct position. If the error
remains, check the media drive by inserting
another media card that you know is working.
Order a new ink cartridge.
Take out the ink cartridge and put it in again
seating it properly.
(See Replacing the ink cartridges on page
12-26.)
Reinsert the correct media card.
Add paper, and then press Mono Start or
Colour Start.
See Printer jam or paper jam on page 12-6.
Verify the number and try again.
Set up the Speed Dial number.
(See Storing Speed-Dial numbers on page
5-1.)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-425cn

Table of Contents