Table of Contents
Advertisement
Important information
2.5
Rack installation instructions
●
When connecting and disconnecting cables, observe the notes in the
documentation for your system and the comments in chapter "Important
notes" in the operating manual supplied with the rack. The operating manual
is supplied with the corresponding rack.
●
When setting up the rack, make sure that the anti-tilt mechanism is correctly
fitted.
If more than one unit is withdrawn from the rack at any one time there is a
●
danger that the rack will tilt forward.
●
The power supply to the rack must be installed by an authorized specialist
(electrician).
The rack must be connected to the power supply by an authorized specialist
●
(electrician).
2.6
Notes on transportation
I
Transport the backup subsystem in its original packaging or in other
suitable packaging which will protect it against shock or impact.
Do not unpack it until all transport maneuvers are completed.
If you need to lift or transport the backup subsystem, ask someone to
help you.
FibreCAT TXF
Rack installation instructions
Operating Manual
15
Advertisement
Chapters
Table of Contents
