Grandstream Networks GXP2000 Network Introduction Manual page 7

Plug into Router/Broadband:
There are three options:-
1. Plug one end of the yellow cable into the LAN socket
on the handset and the other into your Router/
Broadband - Fig 6. No connection to a computer is
needed. The PC socket should be empty.
2. Plug one end of the yellow cable into the LAN socket
on the handset and the other into a spare network
socket on your computer network. No connection to a
computer is needed. The PC socket should be empty.
3. 3. If there is no socket available, then you can unplug
the network connection from the back of your computer
and plug it into your LAN socket on the handset. Then
plug one end of the yellow cable into the PC socket on
the handset and the other into the network socket on
the computer. This allows the computer to continue to
receive network traffic and the phone to function.
Switch Handset on:
Switch phone on and wait 25-30 seconds for
configuration.
Activate your System:
Phone 12345 to activate (Mon-Fri - 9am - 5pm).
Note: this phone will not function if plugged into a
standard BT analogue socket.
Birchills Telecom Ltd, 34 Green Lane, Walsall, West Midlands, WS2 8HB
t: 01922 21 33 33 e: admin@birchills.net w: www.birchills.net
Fig 5: Plug into WAN Socket
GXP Connection PC
Fig 6: Plug into Router /Broadband
Headset Jack
LAN +5VDC
7