Unpacking
Removing the packing materials
Remove the 1000ux/1900ux/2300ux jukebox packing materials.
1. Cut the two plastic bands that secure the jukebox and packing materials to the
2. Lift the carton up to expose the jukebox, and set the carton aside (see
Figure 2: Removing the carton, ramp, and foam rails from the pallet
3. Using at least two people, remove the pallet ramp from on top of the jukebox
4. Remove the accessory kit and set it aside for later use.
5. Remove the foam rails from the top of the jukebox (see
14
pallet.
WARNING:
The plastic bands are under tension and may snap away when
cut. Wear safety goggles when cutting the bands.
Figure
2).
and set it aside (see
Figure
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox Setup Guide
2).
Figure
2).