Stanley FatMax FME142 Original Instructions Manual
  1. Manuals
  2. Brands
  3. Stanley Manuals
  4. Drill
  5. FatMax FME142
  6. Original instructions manual

Stanley FatMax FME142 Original Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

FME142

Advertisement

Table of Contents
loading

Related Manuals for Stanley FatMax FME142

Summary of Contents for Stanley FatMax FME142

  • Page 1 FME142...

  • Page 3: Intended Use

    If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) Your Stanley Fat Max impact drill has been designed for protected supply. Use of an RCD reduces the risk of drilling in wood, metal, plastics, and masonry as well as for electric shock.

  • Page 4: Residual Risks

    ENGLISH (Original instructions) d. Store idle power tools out of the reach of children and The intended use is described in this instruction manual. do not allow persons unfamiliar with the power tool or The use of any accessory or attachment or performance these instructions to operate the power tool.

  • Page 5: Electrical Safety

    Selecting the drilling mode If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Stanley Fat Max Service For hammer drilling in masonry and concrete, set the Centre in order to avoid a hazard.

  • Page 6: Maintenance

    For continuous operation, press the lock-on button (2) and release the variable speed switch. This option is available Should you find one day that your Stanley Fat Max product only at full speed or at any speed preset with the variable needs replacement, or if it is of no further use to you, do not speed control knob (3).

  • Page 7: Technical Data

    Concrete These products also comply with Directive 2004/108/EC and 2011/65/EU. For more information, please Steel contact Stanley Europe at the following address or refer to the back of the manual. Wood For more information, please contact Stanley Europe at the Weight following address or refer to the back of the manual.
  • Page 8 If you wish to make a claim, contact your seller or check the location of your nearest authorised Stanley Fat Max repair agent in the Stanley Fat Max catalogue or contact your local Stanley office at the address indicated in this manual. A list of authorised Stanley Fat Max repair agents and full details of our after sales service is available on the internet at:www.
  • Page 12 United Kingdom Stanley Fat Max Tel. 01753 511234 210 Bath Road Fax 01753 572112 Slough, Berkshire SL1 3YD www.stanleytools.co.uk 90595651 REV-0 01/2013...

This manual is also suitable for:

Fat max fme142

Table of Contents