Toshiba RAS-22SKV2-A1 Service Manual page 43

4. DRY OPERATION (COOLING ONLY)
For dehumidification, a moderate cooling performance is controlled automatically.
1. Push MODE : Select Dry
2. Push MODE : Set the desired temperature.
TEMP
5. Hi POWER OPERATION
To automatically control room temperature and airflow for faster cooling or heating operation
(except in DRY and FAN ONLY mode)
Push Hi-POWER : Start and stop the operation.
6. ECO OPERATION
To automatically control room to save energy (except in DRY and FAN ONLY mode)
Push ECO : Start and stop the operation.
Note:
Cooling operation; the set temperature will increase automatically 1 degree/hour for 2 hours
(maximum 2 degrees increase). For heating operation the set temperature will decrease.
7. TEMPORARY OPERATION
In case of the misplaced or discharged remote controller
• Pushing the RESET button, the unit can start or stop
without using the remote controller.
• Operation mode is set on AUTOMATIC operation, preset
temperature is 24°C and fan operation is automatic speed.
8. TIMER OPERATION
1 Push : Set the desired ON timer.
ON
2 Push : Set the timer.
SET
3 Push : Cancel the timer.
CLR
Daily timer allows the user to set both the ON and OFF timers and will be activated on a daily basis.
Setting Daily Timer
1 Push : Set the ON timer.
ON
2 Push : Set the OFF timer.
OFF
• During the daily timer is activation, both arrows (
.
Setting the ON Timer Setting the OFF Timer
Push : Set the desired OFF timer.
OFF
Push : Set the timer.
SET
Push .
CLR
3 Push .
SET
Push button during the
SET
4
( or ) mark flashing.
or ) are indicated.
– 43 –
FILE NO. SVM-12002