Wall Mount; Architectural Appeal - LG LAU090HYV Engineering Manual

arChitECtural aPPEal

Convergence of Technological Innovation with Flexibility and Style
Benefits of Single Zone
Art cool Premier Wall Mount System
• Inverter technology
• Available in 9,000 and 12,000 Btu/h capacities
• All-season use - heat pump models for both
cooling and heating capabilities
• operating ranges for outdoor units of 14°F to
118°F (DB) for cooling; -13°F to 65°F (WB) for
heating
• operating ranges for Indoor Units of 53°F to
75°F (WB) for cooling; 60°F to 86°F (DB) for
heating
• Quiet operation inside and outside
• Duct Free Split system
6 | InTroduCTIon
Single Zone inverter

Wall Mount

Choosing an LG Single Zone Wall Mount
product provides a system designer an
edge to engineer a system with indi-
vidual control, and design flexibility with
advanced controls. The Art Cool Premier
outdoor and Indoor units are available
in a nominal capacity range of 3/4 to 1
ton. These are best suited for applica-
tions with zones that require heating or
cooling, such as residential, and small
business office buildings.
Single Zone Wall Mount outdoor
and Indoor units are available in
208–230V/60Hz/1Ph.
adaptable and
Flexible
The Single Zone Wall Mount System
allows cooling or heating for the entire
residence or just a single room without
the need for evasive duct work. There is
minimal renovation needed.
Long refrigerant piping lengths allow
for extra design flexibility in indoor unit
installation.
These units may be used for a number of
residential or commercial environments
such as:
• older homes
• new home construction
• office buildings
• Restaurants
• Hospitals / Medical facilities
• Schools
• nursing homes
• Retail establishments
• Houses of worship
inverter technology
Inverter variable-speed Duct Free Split
Systems are measurably quieter and
Due to our policy of continuous product innovation, some specifications may change without notification.
consume less energy than conventional
air conditioners. The Inverter compressor
ramps up or down to match the required
room capacity and maintain the comfort
level. When the selected temperature
is reached, the inverter compressor
operates at low speed to maintain that
comfort level, thereby using less energy.