Battery installation
Install the battery as show below.
1.
Plug the battery
connector securely
into the socket inside
the handset battery
compartment, matching
the orientation of the
engraved label.
ChargE light
TONE
4.
Charge the handset by placing it
face up in the telephone base or
charger. The ChargE light is on
when charging.
ImPorTanT InformaTIon:
Use only the supplied rechargeable battery or replacement battery (model BT183342). To order,
visit our website at
1 (866) 288-4268
In Canada, dial
2.
TONE
www.telephones.att.com
Insert the supplied
battery with the label
ThIs sIDE uP facing
up as indicated.
To replace the battery, press
the tab and slide the battery
compartment cover downwards.
Lift out the old battery and
disconnect it from the handset.
Follow the instructions above to
install and charge a new battery.
.
3
3.
Align the cover flat
against the battery
compartment, then
slide it upwards until
it clicks into place.
1 (800) 222-3111
or call
.