Directory - AT&T EL52103 Quick Start Manual

Directory

Directory overview
The directory is stored in the telephone base and shared by all handsets. It stores up to
50 entries. Changes made to the directory on any one handset apply to all. Only one
handset can review the directory at a time.
Create directory entries
Press mEnu/
1.
sELECT
Directory and then press
2. Press /sELECT to choose add contact.
mEnu
3. Use the dialing keys to enter the telephone number (up to 30
digits). Press
mEnu
4. Enter the name when prompted. Use the dialing keys to enter
a name (up to 15 characters). Each time you press a key, the
character on that key appears. Additional key presses produce
other characters on that key. Refer to the Character chart
under Create directory entries of the online user's manual for
information on entering special characters.
5. Press /sELECT to store your new directory entry. The screen
mEnu
shows saved.
While entering names and numbers, you can edit them using the
following controls:
• Press or
CID
• Press /DELETE to erase a digit or character.
muTE
• Press and hold
• While entering telephone numbers, press and hold
3-second dialing pause (a P appears).
While entering a name, press 0 to add a space.
•
review directory entries
1. Press DIr when in idle mode. The screen briefly shows the directory summary
followed by the first entry in the directory.
2. Press or
CID
start a name search. Entries appear alphabetically by the first letter in the name.
note: If the telephone number in the directory exceeds 15 digits, a dash appears after the
14th digit, and the remaining digits are displayed after two seconds beginning with a dash.
in idle mode. Press
/sELECT.
mEnu
/sELECT to save the number in the display.
to move the cursor to the left or right.
DIr
/DELETE to erase all digits or characters.
muTE
to browse through the directory or use the dialing keys (0-9) to
DIr
or to scroll to
CID DIr
rEDIaL
14
Add contact
ECO
Enter number
888-883-2445_
ECO
Charlie Johnson_
ECO
/PausE to enter a