Skoda Roomster Owner's Manual page 183

Changing the high beam bulb (halogen projector headlights)

Read and observe and
›
Remove the protective cap » Fig. 161
2
›
Turn the socket with the bulb to the stop in the direction of the ar-
row » Fig. 164 and remove it.
›
Replace the bulb, insert the connector and new bulb and turn to the stop in
the opposite direction to that of the arrow.
›
Fit the protective cover .
2
Changing the front turn signal bulb

Read and observe and
›
Remove the bulb holder » Fig. 161
B
stop in an anti-clockwise direction and remove with the bulb for the turn sig-
nal.
›
Replace the bulb, insert the bulb holder with the new bulb and turn clock-
wise to the stop.
Changing the front parking light bulb

Read and observe and
›
Remove the protective cap » Fig. 161
A
›
Grasp the lamp holder and remove it from the bulb housing.
›
Replace the light bulb and insert the lamp holder back into the headlamp
with the bulb.
›
Fit the protective cap.
180
Do-it-yourself
Fig. 164
Removing the bulb for the main
beam
on page 178 first.
on page 179.
on page 178 first.
on page 179 or the bulb holder
on page 178 first.
on page 179 or .
2
Fog lights and daytime running lights
Fig. 165 Front bumper: Protective grille/removing the fog light

Read and observe
Bulb arrangement » Fig. 165
Light bulb for daytime driving light
A
Light bulb for fog lights
B
Removing the cap
›
Grasp the protective grille in the areas marked by the arrows
and remove the cover in the direction of the arrow.
Replacing light bulbs for fog lights/daytime running lights
›
to the
3 Insert your hand into the opening in the protective grille and press the
catch » Fig. 165 -  in the direction of the arrow.
›
Remove the fog lamp.
›
Turn the connector with the bulb in counter-clockwise up to the stop and re-
move.
›
Replace the bulb, insert the holder with the new bulb and turn clockwise to
the stop.
›
To re-install the fog light, first of all place the fog light with the lug on the
side opposite the licence plate.
›
Press in the fog lamp on the side closest to the licence plate.
›
Insert the cap, beginning with the lug on the side opposite the license plate.
›
Press in the cap on the side facing the license plate. The cap must engage
firmly.
and on page 178 first.
» Fig. 165 - 