Table of Contents
Advertisement
installation & connection
INSTALLATION
J
This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the
external cable is not. You are recommended to install this product below the edge of eaves to
prevent the cable from being externally exposed.
Precautions before installation
Ensure you read out the following instructions before installing the camera:
• Select an installation site that can hold at least 5 times the camera's weight.
• Stuck-in or peeled-off cables can cause damage to the product or a fire.
• For safety purposes, keep anyone else away from the installation site.
And put aside personal belongings from the site, just in case.
Disassembling
1. Using the L-wrench or drill bit provided, loosen
2 screws by turning them counterclockwise and
separate the dome cover.
Note that it is not necessary to loosen the screws completely.
English _15
Hide quick links:
Advertisement
Table of Contents
