Introduction; Projector Features - BenQ MX520 User Manual

Introduction

Projector features

This model is one of the best projectors available in the world. You can enjoy the best
performance video quality with up to 300-inch projection across various devices such as
PC, laptop, DVD and VCR even document camera to bring all possibility to life.
The projector offers the following features
• SmartEco™ starts your dynamic power saving
SmartEco™ technology saves lamp power consumption up to 70% depending on the
content brightness level when SmartEco mode is selected
• Longer hours lamp life with SmartEco™ technology
SmartEco™ technology increases the lamp life hours when selecting SmartEco mode
to lower the power consumption
• ECO BLANK saves 70% of lamp power
Pressing the ECO BLANK bottom to immediately hide the image, lowering 70% of the
lamp power at the same time your image is hiding
• Less than 0.5W in standby condition
Less than 0.5W power consumption under standby mode
• Filter Free
Filter free design to lower maintenance and operating costs.
• Network Control (MX703 only)
Integrated RJ45 connector for wired network control allowing management of
projector status from a computer using a web browser.
• Crestron RoomView
The projector supports Crestron eControl and RoomView, PJ Link and AMX allowing
you to control and manage equipment from a remote computer via LAN connection.
• One-key auto-adjustment
Pressing AUTO on the keypad or remote control to show the best picture quality
immediately
• Built-in 10W speaker(s) (MX703 only)
Built-in 10W speaker(s) providing mixed mono audio when an audio input is connected
• Quick Cooling, Auto Power Off, Signal Power On, Direct Power On
Quick Cooling function speeds up the cooling process when turning off the projector.
Auto Power Off function allows the projector to turn off automatically if no input
signal is detected after a set period of time. Signal Power On function turns on your
projector automatically once detecting the signal input and Direct Power On turns
your projector when the power is fed.
• Instant Restart
Selectable Instant Restart function enables you to restart the projector immediately
within 90 seconds after turning it off.
• 3D Function supported
Various 3D formats make the 3D function more flexible. By presenting the depth of the
images, you can wear BenQ 3D glassed to enjoy the 3D movies, videos and sporting
events in a more realistic way.
• The apparent brightness of the projected image will vary depending on the ambient lighting conditions,
selected input signal contrast/brightness settings, and is directly proportional to projection distance.
• The lamp brightness will decline over time and may vary within the lamp manufacturers specifications. This
is normal and expected behavior.
Downloaded From projector-manual.com BenQ Manuals
® , PJ Link and AMX supported (MX703 only)
Introduction 7