Table of Contents
Advertisement
Function
Operation
Settings
Remote
Receiver (for
MX703)
42
Operation
Downloaded From projector-manual.com BenQ Manuals
Direct Power On
Allows the projector to turn on automatically once the power is fed
through the power cord.
Signal Power On
Sets whether to turn the projector directly on without pressing
POWER or ON when the projector is in standby mode and the signal
is feed through the VGA cable.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See
page 47
for details.
Quick Cooling
Enables or disables the Quick Cooling function. Selecting On enables
the function and projector cooling time will be shortened from a
normal 90-second duration to approximately 30 seconds.
This function is only available when Instant Restart is off.
Instant Restart
Selecting On enables you to restart the projector immediately within
90 seconds after turning it off.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
page 32
for details.
Sleep Timer
Sets the auto-shutdown timer.
Allows you to enable all the remote receivers or one specific remote
receiver on the projector.
Description
"Setting Auto Power Off" on
"Hiding the image" on
Advertisement
Table of Contents
