Correcting Keystone - BenQ MX520 User Manual

Correcting keystone

Keystoning refers to the situation where the projected image is noticeably wider at either
the top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, you will need to manually correct it following ONE of these steps.
• Using the remote control
Press
to display the Keystone correction page. Press
to correct keystoning at the top of the image. Press
to correct keystoning at the bottom of the
image.
• Using the OSD menu
1. Press MENU/EXIT and then press
2. Press
correction page displays.
3. Press
keystoning at the bottom of the image.
20 Operation
Downloaded From projector-manual.com BenQ Manuals
/ on the projector or remote control
to highlight Keystone and press MODE/ENTER. The Keystone
to correct keystoning at the top of the image. Press
/ .
Press
/ until the DISPLAY menu is highlighted.
/ .
Press
to correct