Black & Decker RC650 User Manual page 6

ENGLISH
• Measure the rice with the measuring cup
(6).
Determining the required water quantity
The amount of water required can be
determined in the following table.
• Measure the water quantity with the
measuring cup (6) according to the table
below.
Rice quantity
1 cups
RC650
2 cups
3 cups
Rice quantity
1 cups
2 cups
RC1050
3 cups
4 cups
5 cups
Rice quantity
1 cups
2 cups
RC1850 3 cups
RC1860 4 cups
6 cups
8 cups
10 cups
RC2850 15 cups
Cooking rice
Warning! Do not interfere with the
automatic action of the control lever by
preventing it from switching to the warm
mode.
6
Warning! Exercise caution when handling
the appliance as the cooking bowl and
accessories get hot during use. These may
remain hot for some time after use.
Warning! Steam can escape from the unit
when the accessories or lid is removed.
• Measure the rice.
• Wash the rice thoroughly under cold
Water quantity
Important: Do not use the cooking bowl to
2 cups
wash the rice.
3 cups
• Put the washed rice into the cooking
3.5 cups
Water quantity
• Add the required amount of water.
2 cups
• Smooth the surface of the rice with the
3 cups
3.5 cups
5 cups
• Put the cooking bowl into the appliance.
6 cups
• Ensure the cooking bowl is correctly
Water quantity
• Fit the lid.
2 cups
• Plug the supply cord into a suitable
3 cups
3.5 cups
5 cups
• Press the control lever (1) to start the
7 cups
9 cups
11 cups
The cook indicator will go out when the
16 cups
cooking process is finished. After that the
keep-warm indicator (3) will light up
automatically.
Note: For the best results stir the rice just
after the keep-warm indicator comes on.
Stirring the rice with the rice spoon allows
the steam to escape. This will give fluffier
rice.
running water to remove excess starch.
bowl (4).
rice spoon, ensuring all the rice is under
water.
fitted in good contact with the heating
plate.
electric supply. The keep warm indicator
(3) will light up.
cooking process. The cook indicator (2)
will light up.