Using The Detector - Bounty Hunter Quick Draw Owner's Manual

Use 9-volt alkaline batteries
Table of Contents

Advertisement

USING THE DETECTOR

Sweep Method
Sweep the detector side-to-side over
the ground.
Keep the searchcoil parallel to the
ground as you sweep; do not lift the
searchcoil at the ends of your sweeps.
Searchcoil motion is required for target
detection (except when using Pinpoint).
HEADPHONE JACK
This detector has a 1/4" headphone
jack. It works with any stereo
headphone that has a 1/4" plug.
When
the
headphone
connected,
speaker
disabled.
USING HEADPHONES
Using a detector with headphones
facilitates detection of the weakest
signals and also extends battery life.
It also allows you to hear subtle
changes in the sound more clearly,
particularly if searching in a noisy
location. For safety reasons, do not
use headphones near traffic or where other dangers are present. This device
is to be used with interconnecting cables/headphone cables shorter than three
meters.
16
jack
is
volume
is
CORRECT
WRONG

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Quick draw pro

Table of Contents