Panasonic SH-ALL1C Owner's Manual page 11

STEP3: Connecting to an AC outlet
≥ It takes some time until the unit connects to a network and becomes ready for
use after it is connected to an AC outlet and turned on.
Once connected to a network, the unit can be used at all times unless the AC
outlet is turned off.
We recommend connecting the unit to an AC outlet that is always live.
≥ Since the network function of the unit remains active even in standby mode,
the unit consumes approximately 2.5 W of power in standby mode.
≥ For the purpose of power conservation, the unit can be disconnected if you will
not be using it for extended period of time.
≥ Do not disconnect the AC power supply cord (AC mains lead) when the unit is
on. Doing so may cause malfunction or damage.
AC power supply cord
(AC mains lead)
(supplied)
- 11 -
To an AC outlet