Virtual Wall Halo - iRobot Roomba Owner's Manual

Virtual Wall
(optional accessory compatible with all models)
The Virtual Wall Halo makes Roomba perfect for homes with pets. By setting up a
protective zone around the Virtual Wall, the Halo prevents Roomba from bumping into
and disturbing your pet's food and water bowls.
Follow these steps to set up the Virtual Wall Halo:
1. Once you have installed batteries in the Virtual Wall, insert it all the way into the Halo.
The circular lens of the Virtual Wall should be completely visible at the top.
2. Place the Halo on the floor, level with Roomba and close to the bowls
(as shown below).
3. If you have one bowl, place it beside the Halo, almost touching the wall.
If you have two bowls, place one on either side of the Halo.
protective zone
bowl
x
protective zone
Halo
bowl
The Virtual Wall Halo works on non-metal bowls less than 10 inches
(25 centimeters) in diameter and up to 3.5 inches (8.9 centimeters) tall.
As the Virtual Wall's battery levels get low, the field may not be strong enough
to protect your bowl(s). If that happens, change the batteries.
®
Halo
bowl
Halo
protective zone
Halo
bowl
Protective zone approximately
20 inches (50 centimeters)
in diameter
bowl
Roomba 800 Series Owner's Manual
bowl
21
EN