Auto Virtual Wall - iRobot Roomba Owner's Manual

Auto Virtual Wall

(optional accessory compatible with all models)
A Virtual Wall creates an invisible barrier that Roomba
®
won't cross. That makes it easy to confine Roomba to
a particular room or area, and prevent it from getting
too close to anything delicate or dangerous.
You can set a Virtual Wall to block openings of up to
seven feet (approximately two meters). It creates a
cone-shaped barrier, so the beam gradually gets wider.
The Virtual Wall also creates a halo of protection around
itself, preventing Roomba from getting too close.
For best performance, place a Virtual Wall on the outside of the doorway you
want to block.
Point the arrows on top of the Virtual Wall towards the opening you want to block.
Auto Virtual Wall
When a Virtual Wall is set to Auto mode, the power
light blinks continuously to indicate it is on. When
battery levels are low, the Virtual Wall blinks twice
repeatedly to indicate it needs new batteries.
When in Auto mode, the batteries should last for
around six months. To save battery power, turn
the Virtual Wall off.
Battery Installation
1
Battery Compartment
®
2
Roomba 800 Series Owner's Manual
3
Two C Alkaline Batteries
EN
19