Samsung 750 Series User Manual page 29

When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.
Temporary image retention may occur when viewing a static image on the set for more than two hours.
After selecting "Zoom1", "Zoom2" or "Wide Fit":
Press the or button to select "Position", then press the ENTER
button. Press the or button to move the picture up and down.
Reset: Press the or button to select "Reset", then press the ENTER
button. You can initialize the setting.
After selecting "Just Scan" in HDMI (1080i/1080p) or Component
(1080i/1080p) mode:
Press the or button to select "Position", then press the ENTER
button. Press the , ,
Reset: Press the or button to select "Reset", then press the ENTER
button. You can initialize the setting.
HD (High De¿nition)
16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Input Source
ATV, Video, S-Video, Component (480i, 480p)
DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080P)
PC
16:9
16:9
Sets the picture to 16:9 wide mode.
Wide Fit U Move
Wide Fit
Enlarges the aspect ratio of the
picture to ¿t the entire screen.
or button to move the picture.
Zoom1 U Move
Zoom1
Magni¿es the size of the picture on
the screen.
4:3
4:3
Sets the picture to 4:3 normal mode.
English - 27
Size
16:9
Zoom1
Position
Zoom2
Wide Fit
4:3
Just Scan
Adjust Enter
Size
16:9
Zoom1
Zoom2
Wide Fit
4:3
Just Scan Position
Adjust Enter
Picture Size
16:9, Zoom1, Zoom2, 4:3
16:9, 4:3, Wide Fit, Just Scan
16:9, 4:3
Zoom2 U Move
Zoom2
Magni¿es the size of the picture more
than "Zoom1".
Just Scan
Just Scan
Use the function to see the full
image without any cutoff when HDMI
(720p/1080i/1080p), Component
(1080i/1080p) or DTV (1080i) signals
are input.
Reset
Return
Reset
Return