Network Test
You can test or con¿rm the network connection status after setting up the network.
1.
Press the MENU button to display the menu.
Press the
or
button to select "Setup", then press the ENTER
2.
Press the
or
button to select "Wireless Network Setup", then press the
ENTER
button.
3.
Press the
or
button to select "Network Test", then press the ENTER
button.
The current network settings will appear.
If no "Access Point Select" is set up, the test cannot be completed. (See
page 111)
Press the EXIT button to exit.
button.
English - 112
Network selection
: Wireless
Cable Network Setup
Wireless Network Setup
V-Chip
Caption
External Settings
Entertainment
: Off
Energy Saving
: Off
PIP
SW Upgade
Wireless Network Setup
Internet Protocol Setup : Auto Setup
Network Test
Access Point Select
: AP1
IP Address
:
0
0
0
Subnet Mask
:
0
0
0
Gateway
:
0
0
0
DNS Server
:
0
0
0
Move
Enter
Network Test
MAC Address
IP Address, Subnet, Gateway, DNS Server
Gateway Ping
Domain Ping
Network Test Completed.
0
0
0
0
Return
Return