Kärcher K 5.80 M Operation Instructions Manual

Kärcher K 5.80 M Operation Instructions Manual

Hide thumbs Also See for K 5.80 M:

Advertisement

K 5.80 M
5.960-830
(2004330-04-03)
Caution!
Do not use the unit
without first having
read the operating
instructions.

Advertisement

Table of Contents
loading

Summary of Contents for Kärcher K 5.80 M

  • Page 1 K 5.80 M 5.960-830 (2004330-04-03) Caution! Do not use the unit without first having read the operating instructions.
  • Page 2: Table Of Contents

    Contents Short instructions Assembly Short instructions ........2 1 Drawing bar Transport unit over even surfaces When unpacking check the contents. Inform Assembly ..........3 your dealer of any damage in transportation. 2 Hand gun storage clip Safety Notes ........... 4 Assembly of the unit is demonstrated with 3 Master switch Before first use ........
  • Page 3: Assembly

    Assembly...
  • Page 4: Safety Notes

    Safety Notes Environmental protection Before first use of the unit read these operating Warning signs on the unit Dispose of packaging instructions and act in accordance with them. Never direct the high-pressure The packaging materials are recyclable. Please Keep these operating instructions in a safe place jet at human beings, animals, hand in the packaging for recycling.
  • Page 5: Before First Use

    Before first use Operation Connection requirements Serious danger! Never grasp the power plug with wet hands. See rating plate or Technical Data for connected Before each use check the power cord and values. power plug for damage. Have a damaged power cord replaced immediately by an authorized Electrical connection Kärcher service point or an electrical specialist.
  • Page 6 Operation Preparation Switching on Connect accessories l Insert power plug. l Press safety button on the handgun and pull Depending on the model the following the lever. accessories are either included in the scope l Turn master switch to “I”. of delivery or are obtainable from specialist Switching off dealers (see also “Special accessories”).
  • Page 7: Finishing Operations

    Operation Finishing operations l Twist the spray lance in the “–” direction until l Master switch to “0”. Adding the cleaning agent the stop. l Draw out power plug. l Draw the deregent suction hose out of the hou- sing to the required length. Recommended cleaning method l Meter out the detergent.
  • Page 8: Safekeeping / Transportation

    Finishing operations Safekeeping / Transportation Care and Maintenance l Pull the lever on the handgun until the unit is Caution! Frost can destroy an incompletely Cleaning without pressure. emptied unit. In the winter keep the unit in a Before long periods of storage, e.g. in winter: frost-free room.
  • Page 9: Help With Faults

    Help with faults Faults often have simple causes which you can Danger of electric shock! Customer Service rectify yourself with the aid of the following Repair work on the unit can only be carried out In the case of questions or faults our Kärcher summary.
  • Page 10: Technical Data

    73/23/EEC (+ 93/68/EEC) Operating pressure (125 bar) 12,5 MPa 89/336/EEC (+ 91/263/EEC, 92/31/EEC, 93/68/EEC) Pump pressure max. (130 bar) 13 MPa Karcher Pty Ltd 2000/14/EC Flow rate (450 l/h) 7,5 l/min 40 Koornang Road Harmonised standards applied: Cleaning agent metering...
  • Page 11: Replacement Parts

    3 Pipe-cleaning set 4 Rotating wash brush 2.883-111.0 5 Wash brush 6 Wet blasting set 4.763-977.0 - K 5.80 M-PLUS 7 Flexible spray lance 8 Three-way nozzle with spray lance 2.883-111.0 9 Spray lance for places which are difficult to access 4.760-544.0...
  • Page 12 Special accessories...

Table of Contents