Table of Contents
Advertisement
6
DSCP Marking
802.1X Configuration
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
72
Differential Services Code Point or DiffServ specifies a simple, scalable method
for classifying and managing network traffic and providing quality of service
(QoS). DiffServ can be used to provide low-latency to critical network traffic such
as voice or streaming media while providing simple best-effort service to non-
critical services such as web traffic or file transfers.
To configure the service queues, click Edit and set the Cos/802.1p and enter the
status and priority.
Port-based network access control uses the physical access characteristics of
IEEE 802 LAN infrastructures to provide a means of authenticating and authorizing
devices attached to a LAN port that has point-to-point connection characteristics,
and of preventing access to that port in cases which the authentication and
authorization fails. A port in this context is a single point of attachment to the LAN
infrastructure.
To configure port-based authentication:
Check Port-based Authentication to enable the feature.
Enter the IP address of the RADIUS server.
Enter the RADIUS UDP Port number.
Enter the RADIUS Secret.
Select the Administration State in the Port table from the drop-down menu:
•
ForceAuthorized—Authorization is not needed. When a LAN port is Force
Authorized, the PCs attached to that LAN port must have a static IP address.
At least one LAN port must be Force Authorized.
•
Force Unauthorized—Controlled port state is set to discard traffic; packets
cannot go through.
•
Auto—Enables port-based authentication. The interface moves between an
authorized or unauthorized state based on the authentication exchange
between the device and the client.
Port Management
Cisco RV320/RV325 Administration Guide
DSCP Marking
Hide quick links:
Advertisement
Table of Contents
