Table of Contents
Advertisement
Side View
Side View
Tab
5
• Make sure the tab on each side of the seat back is fitted inside the
socket on each side of the seat bottom.
• Insert the hinge rod through the hinge on the seat assembly.
• Insert a #8 x 2,5 cm (1") screw into the end of the hinge rod.
Tighten the screw with the Allen wrench.
Side Rails
6
• Fit the side rails under the grooved areas under the seat, as shown.
• Insert four #8 x 2,5 cm (1") screws into the holes in the seat.
• Tighten the screws with the Allen wrench.
Assembly
Tab
• Fit the end of each swing arm into the grooves in the seat.
Hinge Rod
• Insert a #8 x 2,5 cm (1") screw into each swing arm. Tighten the
screws with the Allen wrench.
IMPORTANT! Push down on the seat assembly to be sure it's secure
to the swing arms.
4
Groove
Swing Arm
Side View
Side View
7
Side View
Side View
Swing Arms
8
Advertisement
Table of Contents
