Wireless Unit Replacement - Panasonic TC-P54Z1 Technical Manual

Wireless Unit Replacement

The RF remote control is included when the TX module is ordered. Therefore when TX and RX are
replaced, the RF remote control is also changed.
The TX and the RX are automatically paired when they are connected to the Tuner and the Display Unit
respectively.
The new remote control has to be registered before it can be used.
To establish connection between the transmitter module and the receiver module:
Connect the TX and the RX to the Tuner unit and the Display unit respectively.
Press the power button on the Tuner unit. (The tuner turns on)
Press the power button on the Display unit. (The display turns on)
The red LED on the TX and the RX should turn ON. When connection between TX and RX is
established the LEDs turn green and the picture appears.
Wireless unit
RF remote
control module
TX
(
Transmitter module)
WT
WH
WHD Host
(TX/RX modules + RF remote control)
Wireless unit
RX
(Receiver module)
WHD
Transmitter
RM
RM
RF module
RF module
WR
WHD Receiver
Slide #87