Display Unit Service Mode (Display Unit Unique Mode)
The Display Unit does not have to be connected to the Tuner Box to enter the Display Service Mode
Use this procedure when performing white balance adjustment.
How to enter:
Use IR Remote control.
Press and hold the Volume [-] button of Display Unit and while holding this button, press the
[Info] or "Recall" button of the IR remote control 3 times within 2 seconds.
Service mode of display unit is displayed.
Note: The menu has a green background and "MONITOR MODE" is not displayed on the top-left side
of the screen
How to exit:
Disconnect the AC cord of display unit from the wall outlet .
Display Unit Service Mode.
Slide #84