Instructions For Use - Dometic RM2351 User Manual

INSTRUCTIONS FOR USE

STARTUP
FIRE HAZARD. Before lighting the gas burner,
after that the RV has not been used for some time,
please check that the gas path between the burner
jet and the burner tube has not been obstructed.
Failure to heed this warning could cause a fire re-
sulting in personal injury.
BURNER MOUNTING
SCREWS
BURNER TUBE .
SPARK ELECTRODE
BEFORE STARTING THE REFRIGERATOR:
• Check that all the manual gas valves are in the ON position.
• Make sure that a continuous 12 VDC supply is available for
the electronic control to function.
TURNING ON/OFF
TO TURN ON THE REFRIGERATOR:
1. Press the main power ON/OFF button (ON posi-
tion).
2. Select operation mode:
• AUTO - AES/AUTO mode (AC and GAS)
Press the AUTO/GAS - AES/AUTO/GAS mode
selector button (if not already on). The illuminated
lamp indicates the selected mode.
(If the CHECK indicator lamp is illuminated, see
REFRIGERATOR OVERVIEW > MODES OF
OPERATION > AUTO MODE - AES/AUTO MODE
for further information.)
• GAS mode (GAS operation only)
Press the AUTO/GAS - AES/AUTO/GAS mode
selector button to turn off the AUTO mode (if not
already off).
(Within 45 seconds the burner should be ignited
and operating normally. If not, see
TOR OVERVIEW > MODES OF OPERATION > GAS
for further information.)
MODE
• DC mode (3-way models only)
Press the DC mode indicator button. The DC lamp
will be turned on. To select AUTO or GAS mode,
turn off the DC mode by pressing the DC mode se-
lector button. The DC lamp will then be turned off.
3. If necessary, adjust the thermostat by pressing the
Temperature selector button.
(RM2351, RM2451, RM2551, DM2652 &
DM2852
The temperature is controlled by a factory
:
preset temperature setting.)
SOLENOID VALVE
INLET FITTING
MANUAL SHUT OFF VALVE
BURNER JET
(Shown in open position)
PRESSURE TEST PORT
REFRIGERA-
TO TURN OFF THE REFRIGERATOR:
Press the main power ON/OFF button
(OFF position).
The refrigerator may be shut off while in any mode of opera-
tion by pressing the main power ON/OFF button. This shuts
off all DC power to the refrigerator, including the interior
light.
If the refrigerator will not be in operation for a period of
weeks, it should be emptied, defrosted, cleaned and the doors
left ajar. The ice trays should also be dried and kept outside
the cabinet.
TURNING ON THE CLIMATE
CONTROL
NDM1062
1. Turn the Climate control switch to I (ON).
2. Press the CLC button. The indicator lamp will
illuminate.
AES
ON AUTO
OFF AC GAS CHECK
TURNING ON THE LOW AMBIENT
CONTROL
NDM1062
1. Turn the Low ambient control switch to I (ON).
2. Press the LAC button. The indicator lamp will
illuminate.
AES
ON AUTO
OFF AC GAS CHECK
- 6 -
The Climate control
switch is located beneath
the top decoration panel
that houses the control
panel.
COLD 1 2 3 4 5 COLDEST CLC
The Low ambient control
switch is located beneath
the top decoration panel
that houses the control
panel.
COLD 1 2 3 4 5 COLDEST CLC
LAC
LAC