Changing The Bios Language - Intel AL440LX Product Manual

Upgrading the BIOS
11. On the header (J8B2), move the jumper back to pins 1-2 as shown below to set normal mode
for Setup.
3
1
J8B2
OM06240A
12. Replace the computer cover and reconnect the AC power cable; leave the upgrade disk in
drive A and turn on the computer.
13. Continue with the BIOS upgrade (see page 42).

Changing the BIOS Language

You can use the BIOS upgrade utility to change the language the BIOS uses for messages and the
Setup program. Use a bootable floppy disk containing the Intel flash utility and language files (see
page 42).
1. Boot the computer with the bootable floppy disk in drive A. The BIOS upgrade utility screen
appears.
2. Select
Update Flash Memory From a File
3. Select
Update Language Set
4. Select drive A and use the arrow keys to select the correct
5. When the utility asks for confirmation that you want to flash the new language into memory,
select
Continue with Programming
6. When the utility displays the message
.
<Enter>
7. The computer will reboot and the changes will take effect.
44
.
. Press .
<Enter>
. Press .
<Enter>
upgrade is complete
file. Press
.lng <Enter>
, remove the floppy disk. Press
.