Sound - Magnavox 55MV314X Owner's Manual

Dynamic to select the desired setting, then press OK
contrast
(Off, Minimum, Medium and Maximum)
J Cursor
Gamma
to adjust the gamma encoding of images
Off
to Set BMR 120 to Off
BMR 120
On
to Make the Video appear smooth
MPEG
to select the desired setting, then press OK
artifact
(Off, Minimum, Medium and Maximum)
reduction
Off
Color to set color enhancement to Off
enhancement
On
to make colors more vivid and bright
to select the desired setting, then press OK
(Red, Yellow, Green, Cyan, Blue and Magenta)
to rotate only
selected color tint
Tint
Custom
in clockwise
color
direction
management
to decrease color
Saturation
with only selected
color
to decrease
Brightness
brightness with
only selected color
Off
to set film mode to Off
Film mode
to optimize the picture recorded by the
Auto
original film
Note(s)
Mode selection is available only if
●
the external Input modes are selected HDMI 1, HDMI 2 or HDMI 3.
–
the connected HDMI device is outputting a video signal.
–
Adjusts Backlight for the Best Picture Quality by Dynamically Adjusting the Backlight
●
Intensity in accordance with the Room Lighting Condition when the Light sensor feature
is Set to On. Please ensure the Room Lighting is Stable and the Light Sensor is Not Blocked.
Cursor K
J Cursor Cursor K
to rotate only
selected color tint
in
counterclockwise
direction
to increase color
with only selected
color
to increase
brightness with
only selected color

Sound

Before you begin:
You must set Home in Location. L p. 31
Otherwise, personalized Picture and Sound settings will not be
memorized after the Unit goes into Standby Mode.
1
Press Z (Home) and use H I J K to select Setup then press
OK.
2
Use H I to select Sound, then press OK.
Picture Auto sound
Equalizer
Sound
Features Balance
DTS TruSurround
Installation
Software
Auto volume leveling
USB
TV speakers
Headphone volume
Digital output format
3
Use H I J K to select the item you want to adjust, then press
OK.
The following sound settings can be configured. Depending on the format
of the broadcasting, some sound settings are not available.
to select the desired Setting, then press OK.
(Personal, Standard, Vivid, Sports, Movie, Music
and News)
Auto sound
When you adjust the following settings
(Equalizer, DTS TruSurround and Auto volume
leveling), Personal sound will be set
automatically.
Adjust the tonal quality for each frequency.
J Cursor
Equalizer
to select the specific frequency using H I, and
use J K to Adjust the Level, then press OK.
Adjust the speakers to suit your listening preference.
J Cursor
Balance
Adjusts the balance of the Right and Left speakers
to Best suit your listening position.
Digital / Digital Cable (ATSC) TV Operation
You can select the Audio language while your TV is receiving the Digital
broadcasting.
to select the language according to your
Digital audio
preference.
language
(It differs depending on the program.)
Cable / NTSC (Analog) TV Operation
You can select Main or SAP while your TV is receiving the Analog
broadcasting that has the SAP (Second Audio Program).
(It differs depending on the program.)
Main
Alternate audio
SAP
25
Personal
Start now
On
Off
On
Multichannel
Cursor K
Cursor K
to output main-audio
to output second-audio program
Continued on next page.
.
English