Samsung SNB-8000 User Manual page 54

network connection and setup
Setting up port range forward for several network cameras
• You can set a rule of Port Forwarding on the Broadband Router device through its
configuration web page.
• A user can change each port using the camera setting screen.
When Camera1 and Camera2 are connected to a router :
User
Start End
3000 3000
3001 3001
4520 4520
4521 4521
8080 8080
8081 8081
Port forwarding can be done without additional router setup if the router supports the UPnP
`
M
(Universal Plug and Play) function.
After connecting the network camera, set <Quick connect> of <Samsung DDNS> to <On> in
the "Setup  Network  DDNS" menu.
54_ network connection and setup

Internet

Broadband Router
Protocol
TCP/UDP 192.168.1.100
TCP/UDP 192.168.1.101
TCP/UDP 192.168.1.100
TCP/UDP 192.168.1.101
TCP/UDP 192.168.1.100
TCP/UDP 192.168.1.101

IP Address

Camera1 (192.168.1.100)
HTTP port 8080
Device port 4520
RTSP port 3000
Camera2 (192.168.1.101)
HTTP port 8081
Device port 4521
RTSP port 3001