Samsung SNB-8000 User Manual page 24

installation & connection
installation
1. Using the template provided as an accessory,
drill the screw installation hole(diameter of 6mm,
minimal depth of 55mm) and firmly insert the
plastic anchor provided as an accessory to the
end.
2. Fit the bottom hole to the anchor hole and insert
and fix the taping screw (M4.5xL50).
3. Connect and arrange the necessary cables lest
that they should be damaged or twisted while
installing the camera.
4. Adjust the lens in a desired direction by referring
to the "adjusting the monitoring direction for
the camera" section. (page 31)
5. Close the dome cover.
To ensure waterproofing, tight up the fixing bolts using the L-wrench and drill bit.
`
24_ installation & connection