Allowing External Access On A Directv Receiver - KVH Industries TracVision TV5 User Manual

TracVision TV5 User's Guide
Receiver Settings

Allowing External Access on a DIRECTV Receiver

42
For automatic satellite switching, the TV-Hub needs to communicate
with the receiver over the network. The receiver needs to be set up to
allow this external access. To allow external access on a DIRECTV
receiver, follow these steps:
NOTE: A video tutorial of this procedure is available in
Tutorials playlist on YouTube
1. Press MENU on the receiver's remote control to access the
onscreen menu.
2. At the main menu, highlight Settings & Help. Then select
Settings.
3. Highlight and select Whole-Home
4. Highlight and select External Device.
5. Set External Access to Allow.
6. At the warning message, select OK.
Figure 5-5 External Device Settings on DIRECTV Receiver
(Internet access required).
KVH's TracVision