Installation Instruction; Setting Address Of Central Control; Checking Address Of Central Control - LG PQWRCDF0 Owner's Manual

Installation Instruction

Installation Instructions
Installer Setting - Setting Address of Central Control
Installer Setting - Checking Address of Central Control
With the PLASMA button pressed, press the RESET button.
1
2 Press the ON/OFF button toward the indoor unit 1 time, and the indoor unit will display the set
address in the display window.
- The address display time and method can differ by the indoor unit type.
3 Reset the remote controller to use the general operation mode.
8 Wireless Remote Controller
1 With the MODE button pressed, press the RESET button.
2 By using the TEMPERATURE SETTING button, set the indoor unit address.
- Setting range : 00 ~ FF
Group No.
Indoor Unit No.
3 After setting the address, press the ON/OFF button toward the
indoor unit 1 time.
The indoor unit will display the set address to complete the address setting.
4
- The address display time and method can differ by the indoor uint type.
5
Reset the remote controller to use the general operation mode.