Chevrolet 2011 Corvette Owner's Manual page 220

7-20 Infotainment System
Pairing a Phone
1. Press and hold
two seconds.
2. Say Bluetooth.
3. Say Pair. The system responds
with instructions and a four digit
Personal Identification Number
(PIN). The PIN is used in Step 5.
4. Start the pairing process on the
cell phone that you want to pair.
For help with this process, see
your cell phone manufacturers
user guide.
5. Locate the device named Your
Vehicle in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN that was provided in Step 3.
After the PIN is successfully
entered, the system prompts you
for
to provide a name for the paired
cell phone. This name will be
used to indicate which phones
are paired and connected to the
vehicle, see Listing All Paired
and Connected Phones later in
this section for more information.
6. Repeat Steps 1 through 5 to pair
additional phones.
Listing All Paired and Connected
Phones
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with is connected
after that phone name.
1. Press and hold
two seconds.
2. Say Bluetooth.
3. Say List.
Deleting a Paired Phone
If the phone name you want to
delete is unknown, see Listing All
Paired and Connected Phones.
1. Press and hold
two seconds.
2. Say Bluetooth.
3. Say Delete. The system asks
for which phone to delete.
4. Say the name of the phone you
want to delete.
Connecting to a Different Phone
To connect to a different cell phone,
the Bluetooth system looks for the
next available cell phone in the
order in which all the available cell
phones were paired. Depending
for
on which cell phone you want to
connect to, you may have to use
this command several times.
1. Press and hold
two seconds.
2. Say Bluetooth.
for
for