Door Swing Dimensions - KitchenAid Bottom-Mount Built-In Refrigerator Installation Manual

Front View
Width dimensions were measured from trim edge to trim edge.
Height dimensions are shown with leveling legs extended
(3 mm) below the rollers.
36" (91.4 cm) Models
36 " (92 cm)
*When leveling legs are fully extended to 1 " (3.2 cm) below
rollers, add 1 " (2.9 cm) to the height dimensions.
42" (106.7 cm) Models
42 " (107.3 cm)
*When leveling legs are fully extended to 1 " (3.2 cm) below
rollers, add 1 " (2.9 cm) to the height dimensions.
The location must permit the door to open to a minimum of 90°.
Allow 4 " (11.4 cm) minimum space between the side of the
"
refrigerator and a corner wall.
NOTE: More clearance may be required if you are using overlay
panels or custom handles.
To adjust the door swing, see "Adjust Door Swing."
*83 "
(211.8 cm)
*83 "
(211.8 cm)

Door Swing Dimensions

36" (91.4 cm) Models
90˚
110˚
130˚
42" (106.7 cm) Models
90˚
110˚
130˚
23"
(58 cm)
51"
(130 cm)
59"
(150 cm)
40 "
(102.7 cm)
13 "
(34.3 cm)
44 "
(112.3 cm)
90˚
110˚
130˚
9