Appendix; Removing The Stand; Setting The Tv On The Wall - Sharp AQuas LC-46D62U Operation Manual

Appendix
Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal.
&
Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching stand
• Before performing work make sure to turn off the 1V.
@
Before performing work spread cushioning over the base area to lay the 1V on. This \Nill prevent it from being
damaged.
1
Hex key 2
Unfasten the four screws used to secure the stand in
place.
Detach the stand from the TV.
(Hold the stand so it will not drop from the edge of the
base area.)
• To attach the stand, perform the above steps in reverse order.
e
This TV should be mounted on the wall only with the AN-52AG1 (SHARP) wall mount bracket. The use of other
wall mount brackets may result in an unstable installation and may cause serious injuries.
.. Installing the TV requires special skill that should only be perlormed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualified·service professional about using an optional AN-52AG1 bracket to mount the 1V to the
wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
AN-52AG1 wall mount bracket.
(See the bracket instructions for details.)
About setting the TV angle and height adjustment
CD
Angle of TV
0/5/1 0/15/20°
®
Height -5/0/ +5 cm
Adjustment
(can be moved
5 cm up or
down)
Angular mounting Vertical mounting
• Detach the cable clamps on the rear of the TV when using the optional mount bracket.
@-49