Operation; Halogen Bulbs; Fuse Replacement - Rangemaster RM51000 Series User Instructions

OPERATION

Controls
The hood is operated using the slide controls
under the bottom of the hood.
The light switch turns the lamps on and off.
The blower switch :makes it possible to
select the motor operating speed. Position 0:
motor off.
The pilot lamp lights up whenever the blower
is on.

HALOGEN BULBS

This range hood requires two halogen bulbs
(Type T4, 12V, 20W).
ALWAYS SWITCH OFF THE ELECTRICITY
SUPPLY BEFORE CARRYING OUT ANY
OPERATIONS ON THE APPLIANCE.
To change bulbs:
1. Loosen the ring nut by turning it
counterclockwise.
2. Remove the bulb by pulling sideward(DO
NOT ROTATE). CAUTION: BULB MAY BE
HOT!
3. Replace with Type T4, 12V, 20W halogen
bulb. Do not touch replacement bulb with
bare hands!

FUSE REPLACEMENT

SWITCH OFF THE ELECTRICITY SUPPLY.
Remove the decorative flue.
Open the fuse box.
Replace with the same type of fuse (5x20mm,
4A, 125V).
LIGHT
SWITCH
DECORATIVE
FLUE
- 10 -
BLOWER
SWITCH
PILOT
LAMP
RING NUT
FUSE
BOX
FUSE