Operation; Halogen Bulbs; Fuse Replacement - Rangemaster RM51000 Series Instructions Manual

OPERATION
Controls
The hood is operated using the slide controls
under the bottom of the hood.
The light switch turns the lamps on and off.
The blower switch :makes it possible to
select the motor operating speed. Position 0:
motor off.
The pilot lamp lights up whenever the blower
is on.
UGHT
SWrrCH BLOWER
SWrrCH
PILOT
LAMP
01 23
HALOGEN BULBS
This range hood requires two halogen buibs
(Type T4, 12V, 20W)+
ALWAYS SWITCH OFFTHE ELECTRICITY
SUPPLY BEFORE CARRYING OUT ANY
OPERATIONS ON THE APPLIANCE.
To change bulbs:
1. Loosen the ring nut by turning it
counterclockwise+
2. Remove the bulb by pulling sideward(DO
NOT ROTATE).CAUTION: BULB MAY BE
HOT!
3+ Replace with Type T4, 12V, 20W halogen
bulb+ Do not touch replacement bulb with
bare hands!
FUSE REPLACEMENT
SWITCH OFFTHE ELECTRICITY SUPPLY.
Remove the decorative flue+
Open the fuse box+
Replace with the same type of fuse (5x20mm,
4A, 125V)+
DECORATIVE
FLUE
FUSE
lO