Chevrolet Corvette 2014 Owner's Manual page 66

3-4 Seats and Restraints
Memory Seats
If memory equipped, the "1," "2,"
SET, and (Exit) buttons on the
driver door are used to manually
save and recall memory settings for
the driver seat, outside mirrors, and
power tilt and telescoping steering
column.
Storing Memory Positions
To save positions to the 1 and 2
buttons:
1. Adjust the driver seat, outside
mirrors, and the power tilt and
telescoping steering column to
the desired driving positions.
2. Press and release SET then
immediately press and hold 1
until a beep sounds.
3. Repeat Steps 1 and 2 for a
second driver using 2.
To save positions to the
button and easy exit features:
1. Adjust the driver seat, outside
mirrors, and power tilt and
telescoping steering column to
the desired positions for getting
out of the vehicle.
2. Press and release SET then
immediately press and hold
until a beep sounds.
Manually Recalling Memory
Positions
If the vehicle is OFF or not in
P (Park) (or parking brake is not set
on a manual transmission), press
and hold "1," "2," or
recall the previously stored memory
positions. Releasing "1, "2," or
before the stored positions are
reached stops the recall.
If the vehicle is ON and in P (Park),
or parking brake is set on a manual
transmission, press and release 1,
(Exit)
2, or to manually recall the
previously stored memory positions.
Placing the ignition in OFF before
the stored positions are reached
stops the recall.
If something has blocked the driver
seat and/or power tilt and
telescoping steering column while
recalling a memory position, the
recall may stop. Remove the
obstruction; then press and hold the
appropriate manual control for the
memory item that is not recalling for
to manually