NComputing L-Series User Manual page 21

The "Save" button saves all the changes made in the tabs and closes the window. This brings the user back to the
host PC list.
The "Cancel" button discards all the changes made in the tabs and closes the window. This brings the user back
to the host PC list.
The "Network" Tab
The "Network" tab contains settings for network connectivity.
If you have an IP Address, click on the "Use Static IP Address" radio button to set an IP address and gateway
address for the access terminal to use.
Otherwise, click on the "Get Dynamic IP Address" radio button to configure the access terminal to use DHCP to
get its IP address.
The MAC address is shown here for reference.
The "Options" Tab
The "Options" tab contains settings for host PC connections.
The "Server Connection List" is a list of three connection profiles. There is a check mark to the right of each
profile that is enabled.
Select a profile and click on the "Edit" button to view and change its settings.
Select a profile and click on the "Enable/Disable" button to enable or disable the profile.
The first profile is called "Autodetection." Unlike the other profiles, its name can never be changed and it has no
specified server network address.
The second and third profiles' default names are "TS 2" and "TS 3," respectively. You can change these profile's
names and they have a "Server Network Address" field where you set a host PC IP address.
21