NComputing L-Series User Manual page 20

Within the "Options" screen, the "Reset" button resets the access terminal
The "Info" button brings up a window to view the following information about the access terminal:
•
Version: the version of firmware running on the access terminal
•
Build: The build number of the firmware running on the access terminal
•
Date: The date of the firmware running on the access terminal
•
Device Model: The model number of the access terminal
•
Loaded Schema Version: The schema version running on the access terminal
•
IP Address: The IP address the access terminal is configured to use
•
Gateway: The IP gateway the access terminal is configured to use
•
MAC Address: The MAC address of the access terminal
•
Serial Number: The serial number of the access terminal
•
Alias: The alias of the access terminal, configured in the host PC management console
•
"Loaded from . . .": How the access terminal loaded its latest firmware update.
The "Close" button closes the options menu.
The "Setup" Menu
Within the "Options" screen, the "Setup" button brings up a set of tabs for viewing and changing the access
terminal settings. Note that this is an optional step to be used for more control of the terminal.
20