Kärcher HDS 4.0/32 Pe Cage Operator's Manual page 9

STEP 7: (Electric Start Models) Turn the engine switch
to "Start" position.
STEP 9: Turn the burner "ON". Turn thermostat dial to
the 210° mark.
OPERATION INSTRUCTIONS
On-Off
Switch
burner
Control
9.800-103.0 • REV. 1/07
Off
STEP 8: (Electric Start Models) Turn the key to the
START position, and hold it there until the engine starts.
If the engine fails to start within 5 seconds, release the
key, and wait at least 10 seconds before operating the
starter again.
Using the electric starter for more than 5 seconds
at a time will overheat the starter motor and can
damage it.
When the engine starts, release the key, allowing it to
return to the ON position. If the choke knob has been
pulled to the CLOSED position to start the engine,
gradually push it to the OPEN position as the engine
warms up.
WARNINg! Never replace
nozzle without engaging the
safety latch on the spray gun
trigger.
ON
START
Engine
Switch
Safety
Latch
9